Engine Treatment with Ceramic Fluid/ 4 Cycle Engines

 To prolong engine life is what we strive to do, and to save money . After review of the opinions of our customer testimonials and the data offered on the website I believe that others telling in their own words will give you the confidence that I have committed to and also use in my own vehicles, motorcycles, lawnmowers, and air compressors.
Some of the differences in our product vs. the others are, the lasting effect and non requirement to continue  "ADDING" to new oil and filter changes. Ceramic Fluid has no suggestion in this area for 36-50K miles of driving. Ceramic Fluid Actually Bonds to the imperfection surfaces thus providing a wet ice on wet ice surface for the piston/cylinder to ride on. Additional treatment suggest only 1/2  the amount 1st installed therefore continuing the bonding in newly worn surfaces .Sounds expensive , ... Read on.

Prolong Engine Life

Ceramic Fluid will not burn off when exposed to Flame as the power stroke of the 4 cycle engine pushes the piston, and the exposed thin film of oil  + an additive  are subject to exhaust flame and disintegration. That's why  just excess oil burning fouls plugs and clogs catalytic converters over time. Ceramic will not disintegrate within engine flame exposure and temperatures . Still not convinced?????    Keep Going...

Bonding  rather than suspended

By not disintegrating and moving around the ceramic particles adhere to the high temperature areas that need them, creating LESS abrasion (normal wear and tear) within the confines of the Cylinder/Piston glide path.  The lasting effects allow normal services to be preformed without loss of the bonded materials.

Now Watch This Example: (fuel savings)

  Oil and Filter Change with an oil additive product and subsequent 1/2 bottle adds for 36,000 miles at oil/filter changes (11 changes).
est. price of Additive product $19.95  1 time plus 1/2 added each oil change thereafter  @ 3000 mile services equals  11 additional 1/2 bottles added  to maintain protection. That is approximately  19.95 + 109.75 = $129.70  cost  over 36000 miles.

est. price of Ceramic Fluid for standard 5qt system = $80.00 and no more. Period. Additional  treatment should begin between 36-50K miles , example; depending on how well fuel mileage is doing. Normally 1/2 the amount is all that is suggested for the second go around, 36 -50 k miles again.
 Now that is even more savings !!!! fuel cost at 50000 miles with consideration of 20 mpg.  AT 20 mpg you would use 2500 gals of fuel and it cost you... $2.00 per gallon = $5000.00 .

Here goes, at +20% savings or 24 mpg, that would =2083 gallons used at $2.00 per gallon = $4166 dollars spent.. Savings of  $834.00 - cost of goods ( $80.00 ) = total of $754.00  saved. How long does it take you to drive 50000 miles??????? Divide the cost over the number of years and realize your savings...

Return to  Home page        Return to top of this page